Compression | H.264, MJPEG, 3GPP |
Resolution |
D1 (704x480/NTSC, 704x576/PAL), CIF (352x240/NTSC, 352x288/PAL), QCIF (176x120/NTSC, 176x144/PAL) |
Frame rate |
30fps @ D1 resolution (NTSC) 25fps @ D1 resolution (PAL) |
Bit rate control | Both CBR and VBR |
Multi-streams |
Maximum 3 video streams: 1x D1, 1x CIF, and 1x QCIF for recording, preview, and 3GPP respectively |
Number of the Preset Positions | 2x16 |
De-interlace | 3D |
Motion detection | Yes |
Blind detection | Yes |
OSD | Yes |
Privacy mask | Yes |
Compression |
G.711 @ 64kbps G.726 @ 32kbps AMR |
Input | 4x TTL terminal block |
DC12V (100mA)out | Alarm in use |
Output | 4x Relay |
Composite input | 2x CVBS, 1.0Vp-p 75 ohm BNC connector |
Audio line input | 2x line-in 3.5mm jack |
Audio line output | 1x line-out 3.5mm jack, Full Duplex Audio |
Microphone input | 1x MIC in 3.5mm jack, Full Duplex Audio |
Alarm I/O | 4x Alarm-in, 4x Alarm-out |
Serial Port | RS485 |
LAN | 1x RJ-45 Ethernet connector with LED |
Factory Default | Button |
External | 1x SD card |
Protocol |
IPv4, HTTP, UDP, TCP, ICMP, IGMP, ARP, DHCP, NTP, SMTP, FTP, SAMBA, UPnP, PPPoE, DNS, DDNS, RTSP, RTP, RTCP |
Mobile Surveillance | Yes |
Web browser | Internet Explorer 6.0 or above |
Application Software | VMS Application Software |
PTZ protocols | Pelco-P, Pelco-D |
Compatible platforms | STD, ZTE, HXHT, Alcatel |
Power Input | 12V DC 1A |
Power Consumption | 4.7W |
Operating temperature | -10°C~ +50°C |
Storage temperature | -20°C~ +60°C |
Humidity | 10% ~ 90% non-condensing |
CGI commands to control camera | |
Media SDK to handle streaming |
Demension | 40.5mm(H) x 145mm(W) x 165.5mm(L) |
Weight | 583.2g |
Certification | CE, FCC class A, RoHs, UL |
Accessories |
Wall mount bracket with 4 screws CD-ROM: e-manual and VMS SW Quick guide |
Warranty | 24 months |